RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 61
Chapter 2 Installing hardware and software
22.Using the keys shown in the next picture, set t he address you want for the currently
selected host card. The press the Enter key to confirm your selection.
23.Press the Enter key to continue the installation.
A prompt is now displayed asking whether or not you want to re- enter hardware details.
24.At the prompt, select no.
Configuration of ISA cards is now completed.
0d0000
Coarse address setting.
Set with up and down arrow keys
Fine address setting
Set with left and right arrow keys