RIO Remote I/O System User Guide
SCO OpenServer 5 troubleshooting
Page 288
4. In the test parameters wind ow, use the cursor keys to select the value you want to set
then cycle through to the value you want using the space bar k ey.
5. Once you have set all the test parameters you require, press the Enter key to start the
test.
The test now runs and displays the test results window shown in the next p icture on
completion.
6. Once you have finished viewing the results of your test, press the Enter key to return to
the Online Diagnostics menu.
Hint
If required, you can halt the test by pressing the Enter key.