RIO Remote I/O System User Guide
Installing RIO under Windows NT
Page 92
Chapter 2 Installing hardware and software
Installing device drivers and utilities
To install the RIO device drivers on your system proceed as follows;
1. Turn on your PC and login to your sy stem as administrator. Then load the CDROM into
your systems CD drive.
2. Start the windows Explorer (or fil e manager) and display the \drivers\rio\winnt\ directory.
3. In the \drivers\rio\winnt\ d irectory, double click on the setup.exe file.
The Install Shield window is briefly displayed.
The Welcome window is now displayed.
Note
If you have previously installed RIO software, a warning message is now displayed
asking you to shutdown all RIO dependent devices. This is because the device
drivers updated during the installation process can only be updated prope rly if
communication to all RIO dependent devices is stopped.