RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 66
Chapter 2 Installing hardware and software
5. Press the Enter key.
The RTA Management menu is now displayed.
6. In the RTA Management menu, click on Configure RTA.
A prompt window is now displayed asking you for a name for the selected RTA.
7. In the prompt windo w, enter the RTA name you want and press the Enter key.
The TTY configuration menu is now displayed.
8. In the TTY config uration menu, click on Use default TTY blocks and press the Enter
key.
You are now returned to the RTA Management menu.