
RIO Remote I/O System User Guide
SCO UnixWare troubleshooting
Page 292
Selecting the RTA and port to testTo select the RTA and port to you wish to test proceed as follows:
1. Turn on your system and login as super user.
2. Disable the port you wish to test. To do this, at the command prompt type
/etc/spcadmport disable r00x (when r00x is the port number for example, r001) and
press the Enter key.
For more information about spxadmport, see spxadmport utility for configuring
ports on page240 in Chapter 4 Quic k Reference.
3. At the command pr ompt, type config.rio and press the Enter key.
The RIO configuration utility window is now displayed showing a ma p of your system. See
Configuring ports with config.rio on page 82 for more details about how config.rio
works.
4. In the RIO configu ration utility window, move the cursor to the RTA associated with the
ports you want to test and press the Enter key.
Note
You should disable any port service active on the port before running
the diagnostics.
RTA
Host card
Link cable