RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 76
Chapter 2 Installing hardware and software
Installing RIO under SCO UnixWare
This section tells you how to install host cards, software drive rs and utilities under the SCO
UnixWare operating system and includes the following;
•General installation procedure for SCO UnixWareon page 77
•Installing device drivers and utilities on page 78
•Assigning ISA host card address and IRQ levels on page 79
•Configuring ports with config.rio on page 82
•Adding an RTA to the systemon page 83
•Removing an RTA from the system on page 86
•Removing device drivers and utilities from your system on page 89
•Creating a login for an RTA on page 89