RIO Remote I/O System User Guide
Installing RIO ISA Host Cards under Windows 2000
Page 129
Chapter 2 Installing hardware and software
14.In the completion message page click on the Finish button to complete the new
configuration.
The Select a Device Driver page is now
displayed.
10.If your host card type isn’t shown, in the
Select a Device Driver page click on the
Have Disk button.
A message window is now displayed which
prompts you for the driver and location you
want to use.
11.In the message window, enter or select the
driver you want and click on the OK button to
accept settings and close the window.
The Select a Device Driver page is now
updated to show the new driver you have
selected.
12.In the Select a Device Driver page, select
the manufacturer and model you require,
then click on the Next > button.
The Start Hardware Installation page is now
displayed.
13.In the Start Hardware Installation page, click
on the Next > button to accept your choice.
A completion message page is now
displayed as shown in the next picture
In this Wizard page Do the following...