RIO Remote I/O System User Guide
RIO system commands under Solaris/Linux/LynxOS
Page 252
Chapter 5 RIO command line utilities
rioadopt
Operating systems Available under: Solaris, Linux and LynxOS.
Function Transfers settings from an RTA removed from the system to a newly installed RTA.
Syntax rioadopt [-c file] [-h] [-v] -r
rioadopt [-c file] [-h] [-v] -i
Argument
descriptions
Examples rioadopt -r generates a report of missing RTAs and newly reported RTAs, similar to
following:
rioadopt:
Missing RTA ID : 994001b0
Missing RTA ID : 94000f0f
New RTA ID : 94000f0f
Argument Description
[-c file] Specifies an alternate configuration file for read and wri te.
[-h] Prints a usage message.
[-v] Sends Error messages and warnings to the standard error
file description.
-r Selects “report only” mode.
-i Causes rioadopt to operate interactively