RIO Remote I/O System User Guide
SCO OpenServer 5 utilities
Page 231
Chapter 4 Quick Reference
View / e dit TTY >
(continued)
Note this option is
only displayed after
the selected RTA has
been configured.
Store settings Maintains the hardware
characteristics of the line across port
closes and reboots when enabled.
Default value is No (don’t store
settings).
Drain settings Forces a port to wait until all data has
been drained before closing when
enabled
When using this setting beware that a
process may appear to be hung while
it is waiting for all the data to be output
before the close.
Resume output Resumes output on a device that has
hung.
Show port settings Displays the stty and special RIO
attributes set on the currently selected
port.
Show modem pin settings Displays the status of the modem pins
on the selected port.
Port diagnostics Runs the port diagnostics facility and
displays the port diagnostics window.
See also page 279.
Port
statistics > Gather port
statistics Gathers statistics on the selected
ports.
See also page 279.
Reset port
statistics Resets the ports statistics counts.
See also page 279.
Show port
statistics Displays statistics for the currently
selected ports.
See also page 279.
Edit ID Name Allows you to change the host ID
name.
Re-boot RTA Reboots the selected RTA.
Zombie RTA Isolates an RTA from the system
without physically disconnecting it.
Once this option has been performed
on an RTA it will need to be re-booted
before it can be used again.
Identify RTA Flashes the LEDs on the selected
RTA in a unique pattern to allow
identification.
Menu option Description