RIO Remote I/O System User Guide
SCO UnixWare utilities
Page 240
Chapter 4 Quick Reference
spxadmport utility for configuring ports spxadmport spxadmport is provided to simplify the process of creating port l ogins on RIO ports. You can
use it in place of the sacadm and pmadm commands.You do this by typing a singl e line
command which contains the information required for a given c onfiguration task using the
following syntax;
Syntax /etc/spxadmport command svctag [label] [owner] where;
Procedure To use the spxadmport script to configure your RIO serial ports proceed as follows;
1. At the command prompt, type one of the commands detailed in the next table using the
syntax /etc/spxadmport [command] [svctag] [label] [owner]
2. Press the Enter key.
The revised RIO port configuration is now adopted by the sys tem.
Item Description Example
command add, enable, disable, remove or list. remove
svctag device number from /dev/term. r01
label /etc/ttydefs entry (optional). 9600
owner user ID assigned to the port (optional). root
Command Description Example command
Add Adds a serial port to the
service monitor (riomon) and
enables the port for monitoring
logins.
/etc/spxadmport add r001 9600
root
Enable Enables a previously disabled
port for monitoring.
/etc/spxadmport enable
Disable Disables a port. Has the effect
of disabling all further logins on
this port.
/etc/spxadmport disable r001
Remove Removes the selected serial
port from the service monitor
(riomon).
/etc/spxadmport remove r001
List Lists the currently defined
services and/or port monitors.
/etc/spxadmport list
List p Lists all logins configured. /etc/spxadmport list p
List s Lists all port services
configured.
/etc/spxadmport list s