RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 54
Chapter 2 Installing hardware and software
Installing device drivers and utilities
To install the RIO device drivers and utilities for the SCO OpenServer operating system
proceed as follows;
1. Login to your s ystem as super user.
2. Load the CDROM into your s ystem CD drive.
3. At the command pr ompt, type mount -f ISO9660 -r /dev/cd0 /mnt and then press the
Enter key to mount the CDRO file system
4. In the SCO Op enServer desktop, double click on the System Administration folder.
The System Administration window is now displayed.
5. In the System Ad ministration window, double click on the Software Manager icon.
The Software Manager window is now displayed.
6. In the Software Man ager menu, click on Software > Install New.
The Begin Installation window is now displayed as shown in the next picture.