RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 81
Chapter 2 Installing hardware and software
6. Press the F10 key to a ccept the changes then press the Enter key to return to the
Software Device Driver Selections menu.
7. In the Software Dev ice Driver Selections menu, select Return to DCU.
8. In the Device Confi guration Utility Main Menu, select Apply Changes and Exit DCU.
9. Re-boot your sy stem.
ISA host configuration is now complete.
Parameter Set to..
MemStart d0000
MemEnd dffff
IRQ level 15