RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 35
Chapter 2 Installing hardware and software
Installing RIO under Solaris
This section tells you how to install host cards, software driv ers and utilities under the Solaris
operating system and includes the following;
•General setup procedure for Solaris on page 36
•Upgrading from existing device drivers on page 38
•Upgrading your current RIO driver on page 38
•Installing device drivers and utilities on page 39
•Assigning ISA host card addresses and IRQ levels on page 41
•Removing RIO drivers and utilities from your system on page 42
•Setting up terminals using Admintool on page 44
•Removing RIO serial port terminals on page 49
•Updating your RIO system configuration on page 51.
Note
This version of RIO supports versions 2.6 and 7 of the Solaris operating system.