RIO Remote I/O System User Guide
Installing an ISA host card
Page 159
Chapter 2 Installing hardware and software
3. Turn off the power to your syst em and disconnect the mains supply.
4. Remove the syst em cover to expose the inside of the connector panel for host cards.
5. Insert the ISA c ard you want to install into a vacant host card slot and secure in place as
shown in the next picture.
6. Repeat step 3. un til you have installed all the ISA cards you want.
7. Replace and sec ure the system cover.
8. Plug in the mains lead and turn on the power.
Installation of ISA host cards is now complete. For further details about installing hos t cards
including other types, see Before you start on page 33.
Warnin g
Dangerous voltages exist inside computer systems. Before
installing host cards in your system, turn off the power supply
and disconnect the mains lead.
Caution
Full anti-static precautions should be taken when handling host
cards.