RIO Remote I/O System User Guide
SCO OpenServer 5 troubleshooting
Page 281
Selecting the RTA and port to test
To select the RTA and port to you wish to test proceed as follows:
1. Turn on your system and login as super user.
2. At the command pr ompt, type config.rio and press the Enter key.
The RIO configuration utility window is now displayed showing a ma p of your system. See
Configuring ports with config.rio on page 64 for more details about how config.rio
works.
3. In the RIO configu ration utility window, move the cursor to the RTA associated with the
ports you want to test and press the Enter key.
The RTA Management menu is now displayed.
Note
You should disable any port service active on the port before running
the diagnostics.
RTA
Host card
Link cable