RIO Remote I/O System User Guide
Windows NT troubleshooting
Page 305
Error Messages
This section lists all error messages output by RIO. To see the error messages, go into the
Windows NT Event Viewer, in the Windows NT Desktop. Each error message is explained
and steps to overcome the problem are described. If these steps do not re medy the error,
contact Technical Support, see Appendix D Contacting Perle.
If you cannot find the error message here, it may have been produced by your operating
system, or another hardware device installed on your system. Most problems can be
resolved by selecting a different address/interrupt for the RIO ca rd or by reinstalling the
software.
Error messages are detailed in the following sections;
•Messages which are common: on page 306
•Messages which are infrequent: on page 307
•Messages which you should rarely see: on page 308