RIO Remote I/O System User Guide
Windows NT troubleshooting
Page 302
NT operating system fails while loading
.
RIO driver or another driver fails to boot
Symptom Action required
System hangs
or blue screen
1. If a blue screen is displayed, note the five hexadecimal
numbers at the top line of the screen. Otherwise go to step
2. of this procedure.
2. Reboot your mach ine.
The system now displays this message:
Press spacebar NOW to invoke Hardware Profile/Last
Known Good Menu
3. Press the spacebar.
The system now displays this message:
To switch to the Last Known Good configuration,
press 'L'.
4. Press the L key to switch to las t known good configuration.
5. If your mach ine now boots properly, change the
configuration settings of the RIO card to match those in the
BIOS setup. See Installing an ISA host card on page 158
in Chapter 2 Installing hardware and software.
6. If your mach ine still fails to boot properly,
check for resource conflicts or faulty hardware.