RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 89
Chapter 2 Installing hardware and software
Removing device drivers and utilities from your system
To remove the RIO device drivers and utilities from your system under SCO UnixWare,
proceed as follows;
1. Login to your s ystem as root.
1. At the command pr ompt, type pkrm rio and then press the Enter key.
2. Re-boot your sy stem.
Creating a login for an RTA
To create a login for an RTA under SCO UnixWare, you use the spxadmport utility. To do
this proceed as follows (this example uses a terminal 9600, 8,1, N on RIO port r001);
1. At the command pr ompt, type /etc/spxadmport add r001 9600R root and press the
Enter key.
Creation of the login is now complete. For more information ab out spxadmport, see
spxadmport utility for configuring ports on page 240 in Chapter 4 Quick Reference.