RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 42
Chapter 2 Installing hardware and software
Removing RIO drivers and utilities from your system
To remove the RIO device drivers and utilities for the Solaris operating system, proceed as
follows;
1. Login to your s ystem as super user and begin a terminal session.
2. At the command pr ompt, type pkgrm rio and press the Enter key.
The following question is displayed:
3. At the question pr ompt, type y and press the Enter key.
A further confirmation is displayed.
4. At the question pr ompt, type y and press the Enter key to remove the software package.
The messages shown in the next picture are now displ ayed and RIO driver and utility
software removed.