RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 86
Chapter 2 Installing hardware and software
Removing an RTA from the system
To remove an RTA from your system configuration, proceed as follows;
1. Physically re move the Remote Terminal Adaptor from your system using the procedures
detailed in Removing a Remote Terminal Adaptor (RTA)on page 173.
2. Login to your s ystem as super user.
3. At the command pr ompt, type config.rio and press the Enter key.
The RIO configuration utility window is now displaye d.
4. Press the Enter key.
The Main Menu is now displayed.
5. In the Main menu , click on Delete an RTA.