RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 56
Chapter 2 Installing hardware and software
The Enter Image Directory window is now displayed.
9. In the Enter Image Directory window, enter the following in the Image directory field;
/mnt/drivers/rio/openserver/x.y.z, where x.y.z is the version number of the driver for
SCO OpenServer 5.
/mnt/drivers/rio/openserver6/x.y.z, where x.y.z is the version number of the driver for
SCO OpenServer 6.
10.In the Enter Image Directory window, click on OK.
The Install Selection window is now displayed.
11.In the Install Selection window, click on the Install button.
If you are upgrading your current Perle RIO device driver, a pop-up window i s now
displayed as shown in the next picture.