Monitoring and Controlling UPS Operation

After you start the UPS, operator intervention is unnecessary except for periodic checks of the UPS status. Manual operation is required only during routine maintenance or service. Use the Monitor Panel and the Control Panel to monitor and control the UPS. Figure 22 shows the location of these two panels on the front of the UPS.

CONTROL

PANEL

MONITOR

PANEL

Figure 22. Location of the Monitor Panel and the Control Panel

The Monitor Panel on the left front of the UPS continually indicates the present mode of UPS operation. This panel contains an LCD screen, backlit status indicators, and the EMERGENCY POWER OFF pushbutton. Use the LCD screen on the Monitor Panel to view performance meters or graphic representations of UPS operation. The Monitor Panel is described in detail in Chapter 9 --- Using the Monitor Panel. A quick reference label describing how to use the Monitor Panel is located below the Monitor Panel.

The Control Panel located to the right of the Monitor Panel contains various controls and switches. These control power to and from the UPS, and allow you to change the UPS mode manually. The Control Panel is discussed in Chapter 10.

Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operation

45

164201261 Rev. F 111503

Page 53
Image 53
Powerware 5075 kVA Monitoring and Controlling UPS Operation, Location of the Monitor Panel and the Control Panel