Powerware 5075 kVA operation manual Using the Menu Options, Setup

Using the Menu Options

The UPS menus allow you to display data in the information area to help you monitor and control UPS operation. The following menus and options are available:

•Meters Displays UPS performance meters for the system or critical load.

•Events Displays the list of Active System Events and a historical log of system events.

•Statistics Displays statistical information about UPS operations for the battery, load, or line.

•Graphics Displays a real-time graphic representation of the flow of current through the internal UPS components.

• Setup Allows you to configure the UPS communications port and set

the date and time for the timestamp.

Figure 25 shows the LCD screen as it appears when you first start the UPS. The Meters menu is displayed in the menu box, with the System option highlighted. In the information area, the system meters show their current readings.

		Uninterruptible Power System
System Normal								04 MAY 1998			14:25:45
Alarm:	None
Notice: None
Battery			Input					Output
Percent
	100%	VAB	VBC	VCA		FREQ	VAB	VBC	VCA		FREQ
		480	480	480		60.0	480	480	480		60.0
		IA	IB			IC	IA	IB		IC	IN
		88	88			88	90	90		90	000
		KVA	KW			PF		KVA	KW	PF
		73	69		0.95			75	60	0.80
Meters
System			Bypass					Battery
Load Amps
		VAB	VBC			VCA		V		I
		480	480			480		540		000
Meters	Events	Statistics Graphics			Setup

Figure 25. System Meters Screen (Typical for Powerware BPIII HE 75 480/480V Unit)

The Input area shows the phase-to-phase voltage, frequency, and phase current of the incoming utility, followed by the KVA, KW, and power factor measurements. The output area shows the same information for the power being output by the UPS.

The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area displays the DC voltage (V) and the DC current (I) at the inverter side of the DC to DC voltage converter.

Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operation 55

164201261 Rev. F 111503