Powerware 5075 kVA operation manual User-Selected Events, Messages Alarms

User-Selected Events

Insert a check at each alarm or notice in the appropriate Group 1 or Group 2 block to indicate the configuration of your UPS.

	INVERTER	Group	Group	INVERTER	Group	Group
	MESSAGES --	1	2	MESSAGES --	1	2
	ALARMS			NOTICES
	Inverter AC Over			Inv. Logic Power Failed
	Voltage
	Inverter AC Under			Bypass AC Over
	Voltage			Voltage
	Inverter Calibration			Bypass AC Under
	Required			Voltage
	Inverter Contactor (K3)			Bypass is Not Available
	Failed
	Inverter DC Over			Bypass Mode
	Voltage
	Inverter Failure			Bypass Over
				Frequency
	Inverter Over			Bypass Under
	Frequency			Frequency
	Inverter Phase Rotation			Input Breaker (CB1)
				Open
	Inverter Setup			Battery Contactor (K2)
	Required			Open
	Inverter Under			Battery DC Under
	Frequency			Voltage
	100% Overload			Battery Discharged
	Shutdown
	125% Overload			Battery Not Charged
	Shutdown
	Over Temperature			Battery Voltage Low
	Shutdown
	Shutdown Imminent			Phase A Current Limit
	Load Off			Phase B Current Limit
	Bypass Contactor (K4)			Phase C Current Limit
	Failed
	Bypass Control Failed
	Bypass Phase Rotation
	Go To Bypass Active
	Battery Contactor (K2)
	Failed
	Battery Ground Fault
Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operation						113

164201261 Rev. F 111503