Samsung CLP-600 manual Network Menu

Item	Explanation
	This item allows you to maintain the toner
	cartridges and other consumables.
	• Check Others: This item allows you to view
	the usage status of consumables.
	Items you can check:
	- Fuser
Maintenance	- MP Pickroll, Tray1 Pickroll, Tray2 Pick
	roll: These items are only for service
	technicians.
	• Alarm Shortage: This item determines how
	the printer behaves when consumable items
	run low.
	Off: The printer does not display a warning
	message.
	On: The printer displays a warning message.

Network Menu

This menu lets you configure the network interface card installed in your printer according to how the network is set up. You can upgrade the network interface card firmware, and print the configuration. (*: the default setting)

Item	Explanation
	Options: Yes, No
	Sets whether or not you configure the network.
Config Network	If you select Yes, you can configure the TCP/IP
	and Netware menus.
	If you select Yes, the following options are
	available: Config TCP, Config WLAN, and
	Netware.
	Options: Yes, No
	Select whether you set the IP address or not.
Config TCP	If you select Yes, you can configure the IP
	address.
	If you select Yes, the IP Get Method option
	appears on the display. You can select how to get
	the IP address.

Item	Explanation
	Options: Static, BOOTP, DHCP
	You can set this item only when you set the
	Config TCP to Yes.
IP Get Method	• Static: You can enter an IP address,
	subnetmask, and gateway manually.
	• BOOTP: The BOOTP server allots an IP address
	to you automatically.
	• DHCP: The DHCP server allots an IP address to
	you automatically.
	You can select this item only when you set IP
	Get Method to Static. This item lets you enter
	an IP address manually. Press the scroll button to
IP Address	set the value of the 1st byte between 0 and 255,
	and then press the Enter button.
	Set the value for the 2nd, 3rd, and 4th byte the
	same way.
	You can set this item only when you set IP Get
	Method to Static. This item lets you enter a
	subnet mask manually. Press the scroll button to
Subnet Mask	set the value of the 1st byte between 0 and 255,
	and then press the Enter button.
	Set the value for the 2nd, 3rd, and 4th byte the
	same way.
	You can set this item only when you set IP Get
	Method to Static. This item lets you enter a
	gateway manually. Press the scroll button to set
Gateway	the value of the 1st byte between 0 and 255, and
	then press the Enter button.
	Set the value for the 2nd, 3rd, and 4th byte the
	same way.
	Values: Yes, No
	Configure the wireless network environments.
	If you select Yes, the following options are
	available: SSID, Operation Mode,
	Frequency Mode, Channel, Security Mode,
Config WLAN	Authentication, Encryption, Using Key, Key
	Type, and Key1~Key4.
	See “Configuring the Wireless Network” on
	page 8.4
	NOTE: This menu only appears when an optional
	wired/wireless network interface card has been
	installed.

3.5

Using the Control Panel