CAUTION:
•Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser’s operating temperature is 180°C (356°F). Take care when removing paper from the printer.
•Do not touch the green surface, the OPC drum, on the front of each toner cartridge with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the access door open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the access door should the installation need to be halted for any reason.
6Open the outer jam cover in Tray2.
8Pull the jammed paper out in the direction shown. To avoid tearing the paper, pull it out gently and slowly.
9Close the two jam covers and go to step 13.
7Open the inner cover of Tray2.
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and continue to step 10.
7.10
