Samsung CLP-600 manual Select Download as Bit Image, Advanced Options window, To Normal or, Draft

Problem	Possible Cause	Solution
Half the	The page orientation	Change the page orientation in your
page is	setting may be	application. For details, see the
blank.	incorrect.	Software section.
	The paper size and	Ensure that the paper size in the
	the paper size	printer driver settings matches the
	settings do not	paper in the tray.
	match.	Or, ensure that the paper size in the
		printer driver settings matches the
		paper selection in the software
		application settings you use.
The paper	There is too much	Remove excess paper from the tray.
keeps	paper in the paper	If printing on special materials, use
jamming.	tray.
		the Multi-purpose Tray.
		Check that the paper size adjusters
		are set correctly.
	An incorrect type of	Use only paper that meets printer
	paper is being used.	specifications.
		If printing on special materials, use
		the Multi-purpose Tray.
	There may be debris	Open the access door and remove the
	inside the printer.	debris.
The printer	The printer cable is	Disconnect and reconnect the printer
prints, but	loose or defective.	cable. Try a print job that you have
the text is		already printed successfully. If
wrong,		possible, attach the cable and printer
garbled, or		to another computer and try a print
incomplete.		job that you know works. Finally, try
		a new printer cable.
	The wrong printer	Check the application's printer
	driver was selected.	selection menu to ensure that your
		printer is selected.
	The software	Try printing a job from another
	application is	application.
	malfunctioning.
	The operating	Exit Windows and reboot the
	system is	computer. Turn the printer off and
	malfunctioning.	then back on again.

Problem	Possible Cause	Solution
Pages print,	The toner cartridge	Redistribute the toner. If necessary,
but are	is defective or out of	see page 6.2.
blank.	toner.	If necessary, replace the toner
		cartridge.
	The file may have	Check the file to ensure that it does
	blank pages.	not contain blank pages.
	Some parts, such as	Contact a service representative.
	the controller or the
	board, may be
	defective.
When you	The setting in the	Select Download as Bit Image in
are using	software application	the Advanced Options window of
Windows	is wrong.	the graphic properties window. Print
98SE, the		the document again.
illustrations
print
incorrectly
from Adobe
Illustrator.
The print	The resolution is set	Change the resolution to
quality of	to Normal or	Best and then try printing again.
photos is not	Draft.
good.
	The resolution of the	If you increase the photo size in the
Images are
not clear.	photo is very low.	software application, the resolution
		will be reduced. Reduce the photo
		size.
Your printer	The oil used to	After printing about 100 color pages,
has an odd	protect the fuser is	there will be no more smell. It is a
smell during	evaporating.	temporary issue.
initial use.

7.3

Solving Problems