Using the Control Panel
3.
6
WLAN Default
This item performs a simple reset and restores
the factory default for the wireless configuration.
N
OTE
: This menu only appears when an optional
wired/wireless network inte rface card has b een
installed.
Netware
You can select whether or not to use the Netware
protocol.
If you select
On
, you can access the Config
Netw ar e menu item.
In the
Config Netware
menu, you can specify
the frame type parameter used on your network.
Config Netware
You can set this item only when you set
Netware
to
On
. This item lets you s elect
whether or not you set the frame type parameter.
Select
Yes
to select the fram e type.
If you select
Yes
, the
IPX Frame Type
option
appears on the display.
IPX Frame Type
You can select this item only when yo u set
Config Netware
to
Yes
. This item lets you
select the IPX Frame Type.
•
Auto
: You can set a frame type automatically.
•
EN_8022
: Select this value to use the IEEE
802.2 frame type.
•
EN_8023
: Select this value to use the IEEE
802.3 frame type.
•
EN_II
: Sel e ct this v a lu e to u se th e ET H ER N E T
II frame type.
•
EN_SNAP
: Select this value to use the SNAP
frame type.
R eset Network This item reboots the network interface card.
Default Set This item performs a simple reset and restores
the factor y defa ult settings for th e netw ork
configuration.
Print Net CFG This item prints a page showing the network
parameters you have set.
Item Explanation
Opt ions: On , Off
Options: Yes, No
Values: Auto, EN_8022, EN_8023, EN_II,
EN_SNAP