Solving Problems
7.
16
Press
Continue Button The printer is waiting
for the user’s action
befo re printing from
the Multi-purpose T r ay
us ing th e m a n ua l fe e d
mode.
Load a s hee t of prin t material
and press the
On Line/
Continue
button. Yo u need to
press the button for each page.
Rea dy [Color]
Low Toner The corresponding
toner c artridge in your
print er is low on toner.
R edistribute the toner in the
corresponding toner cartrid ge,
referring to page 6.2.
Ready
IP Con fli ct The IP address of the
printer conflicts with
other devices on the
network.
Contact your network
administrator and choose an
address within your subnet
which will not conflict with any
other devices.
Rear Fan Error A problem has
occurred in the Rear
Fan of the printer.
Unplug the power cord and
plu g it in ag a in . If t he p ro b le m
pers ists, call for se rvice.
Replace [Color]
Toner The corresponding
toner c artridge in your
printer is nea rly
empty. However, the
printer co ntinues
printing, even though
print quality is not
optimal. When the
‘[Color] Toner Empty’
message appears, the
printer will stop
printing.
If n ecess ary, replace the
corr es pon ding toner cartrid ge
with a n ew o ne . Se e pag e 6 . 4.
Replace Fuser The life span of the
fuser unit ha s expired
and the printer will
stop printing until a
new fuser unit is
placed into the printer.
R e pla c e th e fus er u nit wi th a
new one. See page 6.7.
Replace Fuser
Soon The life span of the
fuse r unit will expire
soon.
When “Replace Fuser”
message
appears
,
the printe r wil l sto p
printing. Replace the fuser unit.
Replace MP
Pick-roller The life span of the MP
pickup roller has
expired.
Contact a service
representative.
Replace
Transfer Belt The life span of the
paper transfer belt has
expired and the printer
will stop printing until
a new paper transfer
belt is placed into the
printer.
R eplace the paper transfer belt
with a n ew o ne . Se e pag e 6 . 5.
Message Status Do this...
Replace Transfer
Belt Soon The life span of the
paper transfer belt will
expire soon.
When the “Replace Transfer
Belt” message appears
,
the
prin te r will stop printing.
Rep lac e t h e pap er t r an sf er belt.
Replace Tray1
Pick-roller The li fe sp an of the
Tray1 pickup roller has
expired.
Contact a service
representative.
Replace Tray2
Pick-roller The li fe sp an of the
Tray2 pickup roller has
expired.
Contact a service
representative.
SMPS Fan Error A problem has
occurred in the SMPS
Fan of the printer.
Unplug the power cord and
plug it in again. If the problem
persists, call for service.
Tra y2 Error The optional Tray2 is
not properly installed
or conn ected to the
printer.
After turn the printer off and
then bac k on , reinstall th e
optional Tray2. If the message
persists, co ntact a serv ic e
representative.
Tray2 Jam Cover
Open The optional T ray2 jam
co ver is open . Close the Tray2 cover firmly.
Message Status Do this...