Samsung SNR-1162P/XET manual Controlling a Remote PTZ Camera, PTZ Control Menu

surveillance mode

CONTROLLING A REMOTE PTZ CAMERA

Use PTZ control menus when you change the screen to one channel screen layout.

PTZ Control Menu

⑥

⑤

⑧

⑪

⑫

⑮

17

18

When you control PTZ, check if PTZ camera protocol has been selected in <Configuration> - <Camera>.

J The following PTZ control menus are subject to change according to the camera protocol.

1.Zoom: Zooms in or out.

①2. Focus: Focuses camera.

3.Iris: Controls iris.

4.Preset Number: Select a preset number to be registered.

②

5.Preset: Saves camera movement as preset.

6.Registration confi rmation box: Select check box for preset or

③		pattern registration.
	7.	Pattern: Registers and moves to auto pattern.
④	8.	P-run: Starts the selected preset number.
⑦	9.	A-run: Starts the saved pattern.
⑨	10. Power: Turns the camera on or off.
⑩
	11. Light: Turns the light on or off.
⑬
	12. Wiper: Turns the wiper on or off.
⑭

13.Aux: Auxiliary button. (It is an extendible button.)

14.Mouse control: You can move PTZ camera using the mouse.

15.Speed: Determines the speed of PTZ control / moving to the

16center screen.

The right-most position is the fastest speed.

16.PAN/TILT Controller: Moves PTZ camera.

17. Camera number: Shows the selected camera number.

18.Protocol: Shows the protocol of the selected camera.

24_ surveillance mode