Samsung SNR-1162P/XET manual To Use Channel Search, Other Search Menus, Window

surveillance mode

To Use Channel Search

You can use one channel search for a channel (camera) in the SURVEILLANCE (live) screen.

Normal play
1. In the SURVEILLANCE (live) screen,
click <One channel search>.
The <One channel search> window	②
appears.

2.Select a channel (camera) to be searched in the <One channel search>

window.	③
You can also select a channel (camera)	③
to be searched in the search panel.
J  If the <One channel search> window
		①
opens, check if the channel to be

searched is the same as the channel in the search window.

3.Click <Play> button.

Rewinds by the time set in <Skip back time> and plays the recording. You can also use the play button in the search panel.

J You can set play time in <Custom Setup>-<Skip back time>. (Default <Skip back time> value is 30 seconds.)

E.g. when <Skip back time> is set to the default value (30 seconds)

If the latest recording data is 12:30:00.

- clicking the play button in one channel search plays the recording from 12:29:30.

②

Other Search Menus

In the SURVEILLANCE screen, click the <One channel search>
button.
The search menu on the right side is activated.	①	②	③	④

1.Smart Search

Select an area in <One channel search>. Then a motion is detected in the specifi ed area, the play is stopped.

2.Map Search

Shows the 24 hour recording status map for all the channels (cameras). You can select a time range to be played on the recording map.

3.Text Search

You can search for a recording, with the text entered in the POS or ATM.

4.Event Search

You can search for a recording, with motion, sensor or the text entered during the recording.

J When the recorder plays back a one-frame (FPS) recording and the selected starting frame is a P-frame, it will start from the closest I-frame, which may result in playing data as earlier as 30 seconds in maximum than the seek time.

30_ surveillance mode