custom setup mode
9.Spot Out Setting
You can set the channel (camera) to be displayed on the external monitor and the time to display the picture from the channel.
You can use the Spot Out Setting only after setting <Custom Setup Mode> - <External monitor mode> - <User Define Mode>.
➀Click a channel (camera).
If you select a camera, the camera changes from <Hide> (X) state to <Show>(number).
Set the order of the cameras to be displayed on the external monitor and the time to display.
You cannot select a channel that is set to <Network> or <None> in <Camera>, in the Spot Out Setting.
➁Set the time to display pictures on the external monitor.
➂Click <Apply> and click <OK>.
➃Other buttons
•Default: Sets the camera order to ascending order and the time to 3 seconds.
•Reset: Sets all the channels (cameras) to Hide (X) state.
•Close: Closes the Spot Out Setting.
10.Event able to popup
When motion or sensor is activated, the linked channel (camera) pops up.
11.Beep escape
Stop the beep sound that is generated when an event occurs, temporarily.
12.Help
Click <Help/F1>.
The user manual pops up.
