Schedule Recording / Timeshift
There is something wrong with the TV.
Try this!
The TV cannot | Refer to the USB device's manual and see if data can be stored on it. | |
recognise the USB | ||
Check if the USB device is in a locked state. | ||
device or the Format | ||
Check if the USB device was formatted when it was connected to a computer. | ||
Device, Check | ||
Formatting a USB device after connecting it to the TV may result in a formatting | ||
Device and Device | ||
failure. If Device Performance Test or Format Device has failed, there may be a | ||
Performance Test | ||
problem with the USB device or its specifications. Try using a different USB device. | ||
functions fail | ||
| ||
|
| |
There is a message |
| |
saying I need to | Check if the USB device is in a locked state. | |
format the USB | Use the USB recovery function to recover the USB device. | |
storage device. |
| |
|
| |
| Check if there is a USB device connected to the TV. | |
Schedule Recording | Check if the channel is a digital channel that can be recorded. Recording will | |
cannot be used. | automatically stop if the signal becomes too weak. The Timeshift function will not | |
| work if there isn't enough storage space on the USB device. | |
|
| |
I get a performance |
| |
test failure message | This problem can occur when using a | |
and then Schedule | ||
does not support recording. A USB hard drive with a speed of 5,400rpm or above | ||
Recording and the | ||
is recommended. A USB memory Stick is not supported. | ||
Timeshift operation | ||
| ||
stops working. |
| |
|
|
