All rights reserved | Saw V1.4.doc |
Copyright ♥ Siemens AG 2008 | Manual SIMOTION Flying |
Section A: Prerequisites and objectives
Basic information
Flying Saw with SIMOTION |
The user program only has to control the material feed and to supply the core function with the correct parameters.
Additional function of the standard application
Further, using this standard application, after the material has been cut with the cutting device, a gap can be created between the individual cut pieces.
This function can also be set at the core function and commissioned by simply entering the appropriate parameters.
1.2.3Advantages of the standard "flying saw" application
When the standard “flying saw” application is used, it offers users the following advantages:
Programs can be quickly generated
When the standard “flying saw” application is used, it is simple to quickly implement a "flying saw" functionality when programming with SIMOTION.
The core functions provided in the standard application can be transferred into the application to be generated quickly and simply by copying. The description of this standard application explains the additional configuring steps that are necessary.
Automatic motion control
The core functions of the standard “flying saw” application can be used to realize all of the flying saw axis motion control using SIMOTION technology functions. The user only programs a execution sequence that corresponds to the actual behavior of the machine function to be implemented.
Possibility of adaptation
The standard “flying saw” application includes all of the source codes in a commented form. This means that the existing core functions can be quickly and simply expanded by the user's own particular functions.
This description also provides you with an explanation of the background required to expand the core functions.
1.3Components included in the standard application
The standard “flying saw” application is implemented as SIMOTION project.
It is a program that can be executed for a (demonstration) machine for the SIMOTION D and PC demonstration case with WinCCflex for visualization.
V 1.4 | Release 06/06/08 | 13/107 |
