Siemens A4027118-A0414 user manual Structure of the global data area of the data unit FSVar

All rights reserved	Saw V1.4.doc
Copyright ♥ Siemens AG 2008	Manual SIMOTION Flying

Section C: Integrating the core “flying saw” functions

Program environment and interfaces

Flying Saw with SIMOTION				A4027118-A0414
	Parameter	Data type	Initial value	Description
	Input/output parameter (IN/OUT)
	UsersInterface	STRUCT		User interface
	ErrorInterface	STRUCT		ErrorID of the technology
				functions
	InternalData	STRUCT		Internal data of the sequence
				control
	SyncPos	STRUCT		Data of the synchronous
	Management			position management
	TimeCalc	STRUCT		Time calculation data
	Output parameter (OUT)
	Done	BOOL	False	Selected mode has been
				activated.
	Busy	BOOL	False	Mode changeover is active.
	Error	BOOL	False	Indicates faults/errors within
				the FBs and at the cross-cutter
				axes.
	Cut	BOOL	False	The flying saw moves in
				synchronism with the material
				web – cutting can start.
	EndSyncPos	BOOL	False	Alarm, if the flying saw
	Reached			passes/exceeds the upper limit
				value of the synchronous range
				when in the automatic mode
	OnTheSpotCut	BOOL	False	The flying saw is in its starting
	Possible			position and an immediate cut
				is possible
	OnTheSpotCut	BOOL	False	The immediate cut was carried-
	Done			out
	SyncNotPossible	BOOL	False	The last synchronization
				operation could not be
				executed with the secondary
				conditions/constraints present.
	ErrorID	WORD	0	Fault code
	State	INT	0	Actual operating mode

6.3.3Structure of the global data area of the data unit FS_Var

The interconnection and links with the technology objects required and the physical reference quantities and control information are saved in the user interface of the instance data area.

The parameters saved here are generally not changed during fault-free operation of the “flying saw”.

V 1.4 Release 06/06/08 68/107