![](/images/new-backgrounds/1209155/209155147x1.webp)
All rights reserved | Saw V1.4.doc |
Copyright ♥ Siemens AG 2008 | Manual SIMOTION Flying |
Section C: Integrating the core “flying saw” functions
Integrating the core “flying saw” functions
Flying Saw with SIMOTION |
7.2.3Technology objects required and synchronous relationships
The following technology objects must be
Technology objects
The required technology objects are listed according to their function within the core “flying saw” functions in the following:
•Generating the master (leading) value from the motion of the material web:
–TO Achse “MaterialAxis” as real positioning or synchronous axis (maximum configuration)
To determine the position and velocity of the material web as master (leading) value of the core “flying saw” functions and to coordinate the motion of the axis – material web from the same control.
•Coordinating the flying saw axis
– TO axis “FlyingSawAxis” as real synchronous axis
Synchronous relationships
The "flying saw" core functions require the following synchronous relationships:
Fig. 7-1 Synchronous relationship required for the “FlyingSaw FB”
Material | 1:1 | Flying | |
Saw | |||
Axis | |||
| Axis | ||
|
| ||
|
|
| |
External encoder |
| Synchronous | |
or positioning | Gearing | ||
axis | |||
axis |
| ||
|
| ||
|
|
|
The MaterialAxis is the reference quantity for the “flying saw”. For this purpose, it must be made available to the “flying saw FB” as “positioning axis”.
V 1.4 | Release 06/06/08 | 74/107 |