Siemens A4027118-A0414 user manual Responsibilities of the operator Correct use, Misuse

All rights reserved	Saw V1.4.doc
Copyright ♥ Siemens AG 2008	Manual SIMOTION Flying

Section B: The application example as demonstration system

I t lli th h d	d ft
Flying Saw with SIMOTION	A4027118-A0414

4.1.2Responsibilities of the operator

Correct use

The correct use of the application components exclusively relates to the open-loop and closed-loop control of test set-ups that were adapted to the power/performance of the application components. In order that the application functions perfectly, the required standard SIMATIC components as well as also the necessary hardware and software components must be installed.

The company/person operating the system may only make changes to the application components after having received written authorization from the suppliers.

Misuse

The following are considered to be misuse:

•Inadmissible loads applied to the application components.

•Any application deviating from the use specified above, or applications that go beyond the specified use.

•Non-observance of the safety information and instructions.

•If faults that could have a negative impact on the safety are not immediately resolved/removed.

•Any changes/modifications to equipment/devices that are used to ensure perfect function and operation, unrestricted use as well as active or passive safety.

•If recommended hardware and software components are not used.

•If the application components are not in a perfect technical condition are not operated conscious of safety and hazards, and not taking into account all of the instructions provided in the documentation.

The manufacturer assumes no liability for incorrect use (misuse).

Responsible for monitoring

The company or person operating the system is responsible in continually monitoring the overall technical status of the application components (defects and damage that can be externally identified as well as changes in the operating behavior).

The company/person operating the system is responsible in ensuring that the application is only operated in a perfect state. He must check the state of the application components before they are used and must ensure that any defect is removed before commissioning.

V 1.4 Release 06/06/08 24/107