All rights reserved | Saw V1.4.doc |
Copyright ♥ Siemens AG 2008 | Manual SIMOTION Flying |
Section B: The application example as demonstration system
|
|
|
|
|
O | t | t l f th | li ti | l |
Flying Saw with SIMOTION |
|
| ||
12After the last cut, the “flying saw” automatically moves to its starting position and waits for new material.
13Once the material has been completely removed from the screen area, then you can
either
allow new material to enter by pressing
the Material START button and continue with Step 8,
or
end the “flying saw” by pressing the Flying Saw END button.
14After the “flying saw” has been ended, you can return to the welcome screen
by pressing the HOME button
15
Process screen
The process screen is the main screen in the automatic mode of the application example to control (operator control) the “flying saw”.
Fig. |
| |
Mode of the | Position and velocity of the | Operating state (OMAG) |
"FlyingSaw FB“ | material and "Flying Saw“ | application example |
Flying Saw
V 1.4 | 06/06/08 | 45/107 |
