Sun Microsystems SL8500 manual SNMP Traps/Notifications, Copying the MIB Text File, Trap Data

SNMP Traps/Notifications

Copying the MIB Text File

The MIB text resides within the library’s controller card (HBC). Use the Library Console (2.26.00) or higher to copy the MIB text file to your PC.

▼To copy the MIB file

1.Log on to the library using StreamLine Library Console.

2.Select Tools ⇒ Diagnostics.

3.Click the TransferFile tab.

4.Click the Transfer button next to “STREAMLINE_TAPE_LIBRARY_MIB_TEXT.text file.”

5.In the Save dialog box, select a “Save in” folder.

6.Type in a file name.

7.Click Save.

SNMP Traps/Notifications

Your Service Representative will add users to the recipients list and configure the traps required to give them access to the information. Currently, this can be only be done through the CLI port, using the “service” logon.

Trap/Notification Levels

Trap or notification levels available at this time are listed in TABLE C-1. Trap levels are generally filtered to include only those traps that you wish to monitor. These levels are specified when entering the trap information.

TABLE C-1	Trap/Notification Levels
Trap Level	Number	Description
Error	1	Error/System Log entries
Warning	2	Warning Log entries
11	11	SNMP Agent Start Up

Trap Data

SNMP traps provide data that are derivations of SL8500 log entries, such as:

■Severity (such as error, warning, information; see TABLE C-2)

■Result codes (such as “0000 = success,” “5010 = robot excessive posn error”)

136 StreamLine™ SL8500 Modular Library System User's Guide • March 2007 Revision K • 96154