Storage Expansion Modules
Note – A CAP will not operate unless the library is in the automated mode.
FIGURE 1-7 CAP
1
21
32
43
4 Rails | 3 CAP |
M agazine | |
|
|
The CAP spans across three
Storage Expansion Modules
Besides the basic configuration, up to five Storage Expansion Modules may be added per library to increase capacity. These expansion modules are installed between the Robotics Interface Module and the Customer Interface Module.
Each Storage Expansion Module can contain up to 1,728 data cartridge slots.
Power
There are five (5) power grids that distribute power throughout the library. Two of the power grids carry 220 VAC; the other three carry 48 VDC.
96154 • Revision K | Chapter 1 Introduction 17 |
