Sun Microsystems SL8500 manual Keypad interfaceSee membrane keypad

K

keypad interfaceSee membrane keypad.

L

LibCam MonitoringA feature that provides two cameras, one for each aisle of the library, for viewing activity inside the library.

library cameraSee LibCam Monitoring.

library complex(1) Two or more Product Name libraries attached to each other with PTPs.

(2)Two Product Name libraries attached to each other with a pass-thru port assembly in which the library on the right (as viewed from the front of the libraries) is the home library and the library on the left is the away library for pass-through purposes.

library consoleSee Streamline™ Library Console™.

library controller (LC)The HBC card within the Product Name library that controls operations and communicates with the operator panel.

library operator panelSee touch screen operator control panel.

library partitionA licensed features that allows SL8500 rails (LSMs) to be partitioned for exclusive use by separate hosts.

library storage module

(LSM)A term used to identify each level of the SL8500, including the rail assembly, robotics, tape drives, power supplies, electronics modules, and accessory rack. The LSMs are numbered top-to-bottom, 0–3.

logical libraryA virtual representation of a physical library. Synonymous with virtual library partition.

M

magazineA removable array that holds cartridges and is placed into the cartridge access port (CAP).

Each SL8500 CAP holds up to three magazines, each of which holds up to 13 cartridges.

master (pass-thru port)The side of a pass-thru port (PTP) that contains the electronics that control the actions of the PTP. See also standby (pass-thru port).

membrane keypadA keypad mounted on the front facade used to monitor the status of the SL8500 library and to operate the CAPs.

96154 • Revision K Glossary 145