Sun Microsystems SL8500 manual To import cartridges using the CAP

Automated Mode of Operation

FIGURE 4-4Placement of Cartridges with the Magazine Outside the CAP

2

3

1

4

L203_474

1.	CAP	3.	Magazine slots
2.	CAP magazine removed	4.	Inserting cartridge with hub down

When a CAP is in automated mode, it is unlocked unless it is currently being used to import cartridges.

▼To import cartridges using the CAP

1.Make sure that the CAP is unlocked (see TABLE 1-4 on page 15 for a description of

CAP indicators).

2.Press the appropriate CAP Unlocked button (CAP A or CAP B) on the operator key pad.

Note – This action causes the CAP to rotate outward and present the magazines to load cartridges.

3.With the CAP open, you may enter the cartridges into the magazines while the magazines are in the CAP; or you may remove the magazines from the CAP, insert cartridges into the magazines, and then replace the cartridge-filled magazines into the CAP.

96154 • Revision K Chapter 4 Library Operation 51