Sun Microsystems SL8500 manual To Override a CAP Reservation, CAP Release and Override Scenarios

Models: SL8500

1 200
Download 200 pages 19.02 Kb
Page 95
Image 95
▼To Override a CAP Reservation

Automated Mode of Operation

To Override a CAP Reservation

Note – You must follow all steps in this procedure. If you do not complete the procedure, the CAP could be left unavailable to all partitions, and/or cartridges assigned to one partition could be entered into another partition.

1.At the SLConsole, select Tools > Diagnostics.

2.On the device tree, expand the CAP Folder.

3.Select the CAP whose reservation you want to override (unreserve).

The screen displays a message identifying the partition (hli1, hli2, hli3, hli4, or default) that has reserved the CAP.

4.Select the Unreserve tab.

5.Select Apply to override the reservation.

6.The screen displays the dialog, “This will remove the reservation from the designated host...”

Select OK to continue with the override operation. The library removes the CAP reservation and sets the CAP user to “default,” which makes the CAP unavailable to all partitions.

Select Cancel to cancel the override operation and return to Step 5.

7.If the CAP is locked, unlock it at the SLConsole.

8.Open the CAP.

If it is empty, proceed to Step 10.

If it contains cartridges, remove them all.

9.Label the cartridges with the partition ID displayed in Step 3.

10.Close the CAP. It locks automatically.

The library locks and audits the CAP to verify that it is empty. It then sets the CAP status to “unreserved,” which makes the CAP available to all partitions.

Note – You might need to refresh the CAP display to see the new CAP status.

11.Contact a person responsible for managing the removed cartridges to determine their disposition. If they are to be re-entered into the library, they must be entered to the correct partition.

CAP Release and Override Scenarios

The following scenarios describe in detail the interactions between the SLConsole, the library, and the attached hosts when a CAP in a partitioned library is used to enter or eject cartridges.

96154 • Revision K

Chapter 4 Library Operation 55

Page 95
Image 95
Sun Microsystems SL8500 manual To Override a CAP Reservation, CAP Release and Override Scenarios