Tefal lid:, washing, ving it, Problems, position, handles*:, replace it, and the lid, Check that:, good condition, The heat level, The cooking time

EXE_IFU_TE_MODULO-2_4136751_mise en page 06/12/11 17:30 Page13

Problems	Recommendations		EN
If steam escapes from	That the lid is properly closed.
around the lid, check:	The position of the lid seal.
	That the seal is in good condition, and if necessary,
	replace it.
	That the lid, the seal, its housing in the lid are clean.
	That the edge of the pressure cooker body is in
	good condition.
If you see steam esca-	Check that the seal is not caught between the pot
ping from around the	and the lid.
lid accompanied by an
ear-piercing noise :
If you cannot open the	Check that the selector is set to	.
lid:	Check that the pressure indicator is down.
	If not: release pressure, if necessary by cooling the
	pressure cooker under cold running water.
	Never tamper with this pressure indicator.
If food is not cooked or	The cooking time.
has burnt, check:	The heat level.
	That the cooking program selector was in the right
	position.
	The amount of liquid.
If food has burnt in	Leave the pressure cooker to soak for a while before
the pressure cooker:	washing.
	Never use bleach or chlorine products.
If one of the safety	Turn off the heat.
systems is triggered:	Leave the pressure cooker to cool down without mo-
	ving it.
	Wait for the pressure indicator to drop down and
	open the pressure cooker.
	Check and clean the operating valve, the steam re-
	lease conduit, the safety valve and the seal.
	If the fault persists, have your appliance inspected
	by a TEFAL Approved Service Center.
If you are unable to put	Check that:
the folding handles* in	The unlocking button* can be moved.
the use position:	If the problem persists, have your pressure cooker
	checked by an TEFAL Approved Service Centre.
If you are unable to	Do not force them.
fold the folding	Make sure that you are fully depressing the handle
handles*:	unlocking buttons*.

* depending on model 13