Thermador PRD36, PRD48, PRD30 manual ExtraLow Techniques, Igniter

Models: PRD30 PRD36 PRD48

1 106
Download 106 pages 60.11 Kb
Page 19
Image 19
ExtraLow Techniques

ExtraLow Techniques

The type and quantity of food affects which setting to use.

The pan selected affects the setting. Its size, type, material, and whether a lid is used, all affect the consistency of the cooking temperature.

To maintain a low or simmer heat, bring food to a rolling boil. Stir well, then cover the pan and lower the heat to a setting just below SIM.

Check periodically to see if the control knob should be turned to another setting.

If an over-size pan is used, the simmer action may occur mainly in the center of the pan. To equalize the temperature throughout the food, stir the food around the outer edges of the pan into the food in the center.

It is normal to stir food occasionally while simmering. This is especially impor- tant when simmering for several hours, such as for a homemade spaghetti sauce or beans.

When lowering the flame setting, adjust it in small steps.

If the setting is too low to hold a simmer, bring the food back to a boil before re- setting to a higher heat.

It is normal not to see simmer bubbles immediately after the food has been stirred.

There may be bubbling when the flame cycles ON and no bubbles when the flame is OFF. Even when the flame is OFF, there will be steam and a slight quiver on the liquid’s surface.

Figure 6: Igniter

Each burner has its own electronic igniter that sparks when the burner is turned on. Each burner should light in 4 seconds or less. If a burner does not light, check to see that the cap is positioned correctly on the base.

CAUTION

Do not touch the burners when the igniters are sparking.

If a burner fails to ignite, refer to “Before Calling For Service” on Page 45.

Page 16

Page 19
Image 19
Thermador PRD36, PRD48, PRD30 manual ExtraLow Techniques, Igniter