Thermador PRD30, PRD48, PRD36 manual Setting Bake/Convection Bake, To Set the Oven

Models: PRD30 PRD36 PRD48

1 106
Download 106 pages 60.11 Kb
Page 35
Image 35
Setting Bake/Convection Bake

CAUTION

WHEN USING THE OVEN IN ANY MODE

Never use aluminum foil to cover the oven racks or to line the oven. It can damage the oven and cause a fire hazard if heat is trapped under it. See Page 5.

Setting Bake/Convection Bake

Bake/Convection Bake These cooking modes are for baking, roasting or warming using one, two or three racks.

Note: When the oven is turned on, the cooling blower will turn on automatically. This is normal. When the oven is turned off, the cooling blower remains on until the oven temperature cools to 375° F. The cooling blower will also operate during Broil. If the blower is not running during these modes, do not use the oven. Call a qualified appliance technician to repair the unit.

To Set the Oven

Figure 20: 30” Oven Control Knob

1.Select BAKE or CONVECTION BAKE using the Selector switch.

2.Set Temperature using the Oven Control Knob.

If using CONVECTION BAKE, set the oven control knob 25° F below tem- perature suggested in the recipe. No change in the temperature if roasting meats or poultry.

The convection fan turns on six minutes after the oven is turned on if CON- VECTION BAKE is selected.

The PREHEATING and HEATING lights turn on.

The HEATING light cycles off and on. The oven is preheated when the PREHEATING light cycles off the first time.

Note: The interior oven light is always on while the oven is in use. The oven light can also be turned on while the oven is off by turning the oven selector switch to the "LIGHT" position.

Figure 21: Secondary Oven Control Knobs

Page 32

Page 35
Image 35
Thermador PRD30, PRD48, PRD36 manual Setting Bake/Convection Bake, To Set the Oven