Toro 4100-D service manual Piston Traction Pump Service

Piston (Traction) Pump Service

		100 to 110 ft--lb				27 to 31 ft--lb
		(136 to 149 N-m)		16		(37 to 42 N-m)
				20				100 to 110 ft--lb
150 to 160 in--lb			18	38		15		(136 to 149 N-m)	4 to 6 ft-lb
(17 to 18 N-m)									(5 to 8 N--m)
						14
1	29					26			40 to 48 in-lb
		4							(4.5 to 5.4 N--m)
				45		22
							27
			10					17
						28 23
			33					8
				7	30
				34			43
	5			35
	31			36		44			32
								11	6
40 to 48 in-lb
									25 to 28 ft--lb
(4.5 to 5.4 N--m)				37
								42	(34 to 38 N-m)
				19		40		41
								31
			39					5	40 to 48 in-lb
						37			(4.5 to 5.4 N--m)
			21
					12
						33
				3		3	9
						13
						24
				2		25

Figure 55

1.	Jam nut	16.	Relief valve (Reverse)	31.	Flat washer
2.	Retaining ring	17.	Socket head screw	32.	Housing gasket
3.	Retaining ring	18.	Valve plate	33.	Cover plate gasket
4.	Seal washer	19.	Pump housing	34.	Control assembly gasket
5.	Socket head screw	20.	Backplate assembly	35.	Plug
6.	Rotating kit assembly	21.	Drive shaft	36.	O-ring
7.	Servo piston assembly	22.	Nut	37.	Seal sub-assembly
8.	Piston follower	23.	Lock washer	38.	Roll pin
9.	Cover plate	24.	Washer	39.	Bearing
10.	Cover plate	25.	Shaft seal	40.	Dowel bushing
11.	Camplate assembly	26.	Relief valve (Forward)	41.	Cradle sub-assembly
12.	Thrust race	27.	Control arm	42.	Cap screw
13.	Thrust bearing	28.	Servo control assembly	43.	Button head cap screw
14.	Bypass valve	29.	Washer	44.	Bushing
15.	Cap screw	30.	Orifice plate (3 used)	45.	Bearing

NOTE: For service of the piston (traction) pump (includ- ing the servo control (item 28), see the Eaton Model 72400 Servo Controlled Piston Pump Repair Informa- tion at the end of this chapter.

Hydraulic System Page 4 -- 76 Groundsmaster 4100--D