Toro 4100-D service manual Disassembly Fig

Disassembly (Fig. 1)

1.Park machine on a level surface, lower cutting deck, stop engine, engage parking brake and remove key from the ignition switch.

2.Disassemble steering tower as needed using Figure

1as a guide.

Assembly (Fig. 1)

1.Assemble steering tower using Figure 1 as a guide.

A.Thrust washer(s) (item 24) on steering column are used as needed to remove end play of steering shaft.

B.If steering wheel was removed, torque hex nut (item 1) from 16 to 20 ft lb (22 to 27 N--m).

Chassis

Groundsmaster 4100--D Page 7 -- 3 Chassis