Toro 4100-D service manual Removal Fig

Removal (Fig. 1)

1.Park machine on a level surface, lower cutting deck, stop engine, apply parking brake and remove key from the ignition switch.

2.Raise and support hood.

3.Remove air cleaner components as needed using Figure 1 as a guide.

Installation (Fig. 1)

IMPORTANT: Any leaks in the air filter system will cause serious engine damage. Make sure that all air cleaner components are in good condition and are properly secured during assembly.

1.Assemble air cleaner system using Figure 1 as a guide.

A.If service indicator (item 8) and adapter (item 9) were removed from air cleaner housing, apply thread sealant to adapter threads before installing adapter and indicator to housing. Install adapter so that grooves in adapter hex and adapter filter element are installed toward service indicator (Fig. 3). Torque in- dicator from 12 to 15 in--lb (1.4 to 1.6 N--m).

2.When installing air cleaner hose (8) between air cleaner and turbo--charger (Fig. 4):

A.Make sure that hose does not contact engine valve cover. To ensure clearance, move and/or ro- tate air cleaner body in air cleaner strap.

B.Position hose to allow maximum clearance be- tween air cleaner hose and muffler bracket.

3.Lower and secure hood.

2

4

1

3

5

		Figure 2		Kubota	EngineDiesel
1.	Air cleaner housing	4.	Air cleaner cover
2.	Safety filter element	5.	Vacuator valve
3.	Air filter element
			2
			3

1

		Figure 3
1.	Air cleaner assembly	3. Adapter
2.	Service indicator

4

1

3 5

2

Figure 4

1.	Air cleaner hose	4.	Air cleaner slots
2.	Engine valve cover	5.	Muffler bracket
3.	Air cleaner strap

Groundsmaster 4100--D Page 3 -- 5 Kubota Diesel Engine