Toro 4100-D service manual 4WD Manifold Service, Ft--lb

4WD Manifold Service

			13	10		6
	35 ft-lb			13
					REAR
	(47 N-m)			11		50 ft-lb
					DOWN	(67 N-m)
25 ft-lb	10			1
(34 N-m)
	4					10
8				11
7
						1
				13
				13
		2	9	10
	3			UP
5				FRONT		11
		20 ft-lb
		(27 N-m)
				PLUG TORQUE
5 ft--lb				#4 Zero Leak: 20 ft--lb (27 N--m)		10
				#6 Zero Leak: 25 ft--lb (34 N--m)
(6.7 N--m)					11
				#8 Zero Leak: 50 ft--lb (67 N--m)
						12

Figure 60

1.	Manifold body	6.	Directional valve (ports PD1 & PD2)	10.	#4 zero leak plug with O-ring
2.	Solenoid valve (port SV)	7.	Pressure reducing valve (port PR)	11. #6 zero leak plug with O-ring
3.	Solenoid coil	8.	Relief valve (port RV)	12.	Orifice (0.050) (ports OR1 and OR2)
4.	Check valve (port CV)	9.	Orifice (0.030) (port SV)	13.	#8 zero leak plug with O-ring
5.	Nut

NOTE: The ports on the manifold are marked for easy

identification of components. Example: P1 is a piston pump connection port and SV is the location for the sole- noid valve (See Hydraulic Schematic in Chapter 9 -- Foldout Drawings to identify the function of the hydraulic lines and cartridge valves at each port).

Hydraulic System Page 4 -- 86 Groundsmaster 4100--D